Brand
Keysight
Keysight Technologies is the largest single line in this catalogue, spanning digital oscilloscopes, spectrum and network analyzers, DC power supplies, source measure units, RF power sensors and the calibration kits and fixtures that support them.
Keysight instruments are generally specified where the measurement has to be defensible rather than merely indicative, which is why they dominate design validation and metrology laboratories. That comes with an ecosystem consideration worth planning for: probes, ECal modules and test fixtures are largely specific to Keysight interfaces and are not interchangeable with other makes, so the choice tends to extend beyond a single instrument. If you are adding to an existing Keysight bench, send us the model you are working with and we will confirm compatible accessories.
Search
Price
Keysight N7020A 2 GHz power rail probe with 1:1 attenuation, 24 V offset, 850 mV active range, 50 kOhm DC input impedance, and low-noise performance for power-integrity analysis.
Keysight 16065A external bias fixture for precision device characterization, providing ±10 V to ±100 V bias with 0.1% voltage accuracy for LCR and impedance measurements.
Keysight N8761A/N8751A-208/N8751A-861 single-output DC power supply with 300 V, 1.7 A, and 5.1 kW output, plus low ripple, protection functions, fast transient response, and remote-control options.
The Keysight N9311X/504 is a high-performance log periodic directional antenna covering 700 MHz to 4 GHz. With 10 dBi gain and a 60° beamwidth, it ensures reliable signal reception and precise testing for RF professionals.
The Keysight N8931A N8900 Series DC system power supply delivers up to 80 V, 510 A, and 15 kW from a single output, with regulated, low-noise power for demanding test applications.
The Keysight MSOX2014A mixed-signal oscilloscope combines 100 MHz bandwidth, 2 GS/s sampling, 1 Mpts memory, and 4/8-channel capability for precise analog and digital signal analysis.
The Keysight 85091D/0DC RF Ecal Module provides DC-to-9-GHz calibration through a 7 mm connector, with typical ±0.05 dB accuracy and ±0.02 dB repeatability for compatible 8509xD Series RF Ecal analyzers. Request a quotation from Indo Multimeter.
Keysight 85521A 3.5 mm female mechanical calibration kit for 8522xA Series VNAs, providing OSLT standards from DC to 26.5 GHz in a traceable four-in-one set.
Keysight N2750A active differential probe with 1.5 GHz bandwidth, selectable 2:1/10:1 attenuation, 120 dB CMRR, 0.5 pF input capacitance, auto-zero, and built-in calibration source.
Keysight N4691D/F0F two-port electronic calibration module for DC to 26.5 GHz VNAs, with 3.5 mm f/f connectors and Open, Short, Load, and Through calibration.
