Brand

Keysight

Keysight Technologies is the largest single line in this catalogue, spanning digital oscilloscopes, spectrum and network analyzers, DC power supplies, source measure units, RF power sensors and the calibration kits and fixtures that support them.

Keysight instruments are generally specified where the measurement has to be defensible rather than merely indicative, which is why they dominate design validation and metrology laboratories. That comes with an ecosystem consideration worth planning for: probes, ECal modules and test fixtures are largely specific to Keysight interfaces and are not interchangeable with other makes, so the choice tends to extend beyond a single instrument. If you are adding to an existing Keysight bench, send us the model you are working with and we will confirm compatible accessories.

Keysight 87222D/161 Coaxial Transfer Switch, DC to 40 GHz, 16-Port
The Keysight 87222D/161 is a high-performance coaxial transfer switch covering DC to 40 GHz with 16 ports. It offers low insertion loss, high isolation, and fast switching, making it ideal for demanding RF test and measurement applications.
Keysight E4417A RF Power Meter Dual Channel 20 Ms/s EPM-P Series
The Keysight E4417A RF Power Meter offers dual-channel, 20 Ms/s measurement speed with a front sensor and 5ft cable. Ideal for RF power, modulation, and signal analysis, it delivers ±0.5 dB accuracy across 10 MHz to 18 GHz. Enhance your testing efficiency with this EPM-P series instrument.
Keysight 53200 Series RF Frequency Counter, 2-Channel, 350 MHz-6 GHz
The Keysight 53200 Series RF Frequency Counter offers 2-channel measurement from 350 MHz to 6 GHz with SMA connectors and OCXO timebase for high accuracy and stability. Ideal for precise frequency measurements in telecommunications, aerospace, and defense applications.
Keysight U9424C Solid State FET Switch, SP4T, 300 kHz-54 GHz
The Keysight U9424C/001/101 is a high-performance SP4T solid state FET switch covering 300 kHz to 54 GHz. It offers low insertion loss, high isolation, and fast switching speeds, ideal for demanding RF test and measurement applications.
Keysight DP0010A Differential Active Probe, 250 MHz, 42 V, 1.7 Mohm
The Keysight DP0010A differential active probe delivers 250 MHz bandwidth and 42 V peak differential input, with high impedance (1.7 Mohm || 1.5 pF) to minimize circuit loading. Ideal for high-speed signal measurements in R&D, debugging, and validation.
Keysight N9910X/801 Mechanical T-Cal Kit, 3-in-1 OSL, DC-6 GHz, Type-N(f)
The Keysight N9910X/801 Mechanical T-Calibration Kit provides a 3-in-1 open, short, load (OSL) solution for vector network analyzers. Covering DC to 6 GHz with Type-N(f) connectors, it ensures accurate, repeatable measurements in a rugged design.
Keysight N7552A/3MM Electronic Calibration Module (ECal), DC-9 GHz, 2
The Keysight N7552A/3MM Electronic Calibration Module (ECal) delivers precise, repeatable calibration for vector network analyzers from DC to 9 GHz. With its 2-port design and N-type connectors, this compact module simplifies calibration, improves measurement accuracy, and saves valuable test time.
Keysight E3644A DC Power Supply, Single Output, Dual Range, 20V/4A, 8V/8A, 80W
The Keysight E3644A is a single-output, dual-range DC power supply delivering 80W (20V/4A or 8V/8A) with high accuracy and low ripple. Ideal for bench testing, it offers remote control and a compact design.
Keysight DSOX3012T 100 MHz 2-Channel Digital Oscilloscope, 5 GS/s
The Keysight MSOX3032T Mixed Signal Oscilloscope offers 350 MHz bandwidth, 5 GS/s sample rate, and 2 analog plus 16 digital channels. With 4 Mpts memory and advanced triggering, it delivers precise signal analysis for demanding engineering tasks.
Keysight U7227C USB Pre-Amplifier, 100 MHz to 26.5 GHz, 20 dB Gain
The Keysight U7227C USB Pre-Amplifier boosts RF signals from 100 MHz to 26.5 GHz with 20 dB gain and 2 W output power. Ideal for spectrum analysis, signal conditioning, and noise reduction, this compact USB-powered amplifier offers easy control and portability for lab and field use.
Keysight 85053B Verification Kit, 300kHz-26.5 GHz, 7.5cm Airline, 20/40dB Attenuator
The Keysight 85053B Verification Kit ensures precise calibration for vector network analyzers in the 300kHz to 26.5 GHz range. Includes a 7.5cm airline and 20/40dB attenuator for accurate high-frequency measurements. Compatible with 8505xx series.
Keysight 53200 Series Universal Frequency Counter/Timer, 350 MHz to 6 GHz, 12-Digit Resolution
The Keysight 53230A/010/106 Universal Frequency Counter offers precise frequency and time interval measurements from 350 MHz to 6 GHz. Featuring a built-in OCXO for exceptional stability, it delivers ±0.01 ppm accuracy and 100 ps resolution, ideal for demanding industrial and lab applications.
Scroll to Top