Techne F932D Temperature Calibrator

For temperature calibration work, the Techne F932D Temperature Calibrator delivers dependable performance. Highlights: fast heat-ups and accurate temperature control.

• Fast heat-ups and accurate temperature control to
• 600° C 50 to 600 C, 240VAC, 50/60 Hz Safer operation than oil baths
• Dry, inert, nontoxic aluminum oxide ensures hazard-free operation
• Baths use aluminum oxide fluidized by low-pressure air as a dry bath medium with excellent heat transfer properties
• Safe to use—aluminum oxide is nonflammable and will not corrode your sample vessels or produce toxic fumes
• Vessels of all shapes can be easily immersed and safely removed from the bath, without the hazard and mess of hot oils
• Make temperature adjustments via a control knob and reference dial
• Achieve bath control and temperature stability of 0.3°C (1°C for 01184-50) under stable conditions
• For repeatability and temperature stability to /-0.2°C, use temperature controller (sold separately)
• These baths require a dry air flow of approximately 3 cu ft/minute at about 3 psi pressure, order an air pump separately
• If your laboratory is already equipped with an air line, it must first be fitted with a filter and pressure regulator, order separately below