Additel ADT912A-B2-SET Pressure Pump

For pressure generation work, the Additel ADT912A-B2-SET Pressure Pump delivers dependable performance. Highlights: the 912A Pneumatic Pressure Test Pump is a hand operated pressure pump designed.

• The 912A Pneumatic Pressure Test Pump is a hand operated pressure pump designed to generate pressure from 95% vacuum to 60psi (4bar)
• A high-quality screw press is designed for fine pressure adjustment, with an adjustment resolution up to 0.1 Pa (0.001 mbar)
• The 912A is a very stable low pressure calibrator
• It makes use of an isothermal bellows chamber which is designed for reducing the possible effects of environmental temperature change
• Most pumps make use of a check valve (non-returning valve) and are not well insulated which will cause large fluctuations in pressure with a change in ambient temperature or when the unit is touched
• The 912A does not use a check valve and is remarkably stable
• Two hand-tight connectors installed on the pump allow easy connecting and disconnecting to the test pump without the need for PTFE tape or wrenches
• The 912A is an ideal comparison test pump for low pressure application
• It can be used in calibrating pressure gauges, transmitters, or other pressure measuring instruments
• 14 to 60 psi, M20X1.5 F with case Portable:
• Only 6.2 lb!
• Adjustment Resolution:
• 0.1Pa (0.001 mbar) High-quality screw press for fine pressure adjustment Isothermal chamber:
• the pressure chamber is insulated to reduce the influence from environmental temperature changes
• Specially designed bellows minimize leakage to guarantee excellent stability
• Shut-off valve closes the air in the isothermal chamber during calibration
• Built-in gas-liquid isolator protects the pump from moisture and dirt
• Easy-to-use Hand-tight Quick Connectors allow easy connecting and disconnecting to the test pump without the need for PTFE tape or wrenches